The following instructions should be followed so we can fabricate the best fitting orthotics for you. Read the following four steps first before taking the impressions.

1. Sit in a chair, and place the open foam impression kit on the floor in front of you.
2. Place each foot gently on the surface and in the middle of each foam block in the box. Remain seated during the entire process.
3. Gently press your foot into the foam, applying approximately equal pressure with your heel and ball of your foot. Press one foot at a time into the foam. Keep your lower leg straight up and down. Press your foot about two inches into the foam, trying not to touch the bottom of the foam box with your foot. Do not grasp the foam with your toes.
4. Remove your feet from the foam box, and examine the contours of your foot. The impressions of your foot should be precisely captured in the foam.

YOU HAVE NOW COMPLETED THE IMPRESSIONS.

COMPLETE THE FOLLOWING STEPS TO SEND US THE IMPRESSION KIT.

1. Close the cardboard box, and seal it with tape. Wide shipping tape is best.
2. Once the impressions are made, close and seal the box and mail to the address using the enclosed pre-paid postage-mailing card.

YOU SHOULD RECEIVE YOUR FOOT ORTHOTIC WITHIN 2 WEEKS. PLEASE E-MAIL US AT QUESTIONS IF YOU HAVE ANY CONCERNS.

If you have any questions or need further assistance, please feel free to contact us toll free at 1.877.687.3338